(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• shown by Molander and co-workers [77]. The synthesis of bridge heteroaryl 1,2,3-BCPs by a decarboxylative Minisci reaction was reported by Poole and co-workers [68]. The previously discussed C–H activation reported by MacMillan and co-workers (Scheme 2) was used to access a wide number of 1,2,3-BCPs [33

Regioselective quinazoline C2 modifications through the azide–tetrazole tautomeric equilibrium

• Dāgs Dāvis Līpiņš,
• Andris Jeminejs,
• Una Ušacka,
• Anatoly Mishnev,
• Māris Turks and
• Irina Novosjolova

Beilstein J. Org. Chem. 2024, 20, 675–683, doi:10.3762/bjoc.20.61

• reactions of substituted anilines VI, VII or N-arylamidines VIII are frequently employed for synthesizing C2-substituted quinazolines (Scheme 1), thereby influencing the spatial arrangement of the desired substituents [13][14]. Moreover, there have been recent advancements in efficient C–H activation

Mono or double Pd-catalyzed C–H bond functionalization for the annulative π-extension of 1,8-dibromonaphthalene: a one pot access to fluoranthene derivatives

• Nahed Ketata,
• Linhao Liu,
• Ridha Ben Salem and
• Henri Doucet

Beilstein J. Org. Chem. 2024, 20, 427–435, doi:10.3762/bjoc.20.37

• %) using again a large excess of DBU base (7 equiv) also allowed to prepare unsubstituted fluoranthene in 87% yield (Scheme 1c) [22]. The reaction of naphthol with aryl bromides followed by nonaflation and intramolecular C–H activation for the access to fluoranthenes has also been reported [23]. Most of

• adjacent or between the two fluorine atoms in these arenes. The synthesis of these two fluoranthene derivatives by Suzuki coupling followed by intramolecular C–H activation was therefore investigated. From (3,4-difluorophenyl)boronic acid and (3,5-difluorophenyl)boronic acid, target products 25 and 26 were

• palladium-catalyzed direct intermolecular arylation, followed by a direct intramolecular arylation step. As the C–H bond activation of several benzene derivatives remains very challenging, the preparation of fluoranthenes from 1,8-dibromonaphthalene via Suzuki coupling followed by intramolecular C–H

Additive-controlled chemoselective inter-/intramolecular hydroamination via electrochemical PCET process

• Kazuhiro Okamoto,
• Naoki Shida and
• Mahito Atobe

Beilstein J. Org. Chem. 2024, 20, 264–271, doi:10.3762/bjoc.20.27

• electron-transfer to give the corresponding radical species through oxidative X–H bond cleavage. One such species is the amidyl radical, which is broadly synthetically useful as a nitrogen source in hydroamination reactions and as a hydrogen atom transfer (HAT) reagent for remote C–H activation [2][3][4][5

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

• Changdong Shao,
• Chen Ma,
• Li Li,
• Jingyi Liu,
• Yanan Shen,
• Chen Chen,
• Qionglin Yang,
• Tianyi Xu,
• Zhengsong Hu,
• Yuhe Kan and
• Tingting Zhang

Beilstein J. Org. Chem. 2024, 20, 155–161, doi:10.3762/bjoc.20.14

• important auxiliary group for the proximal C–H activation with the efforts of Daugulis [5] and others [6]. Results from medical research indicated that the introduction of halogen atoms into quinoline motifs has positive effects on their bioactivities, such as antimalarial, antitumor, and so on [7

Radical chemistry in polymer science: an overview and recent advances

• Zixiao Wang,
• Feichen Cui,
• Yang Sui and
• Jiajun Yan

Beilstein J. Org. Chem. 2023, 19, 1580–1603, doi:10.3762/bjoc.19.116

• of the chemical versatility of the hydroxy moiety (Scheme 15). Site-selective radical C–H activation has been proven to be a useful tool to functionalize relatively inert polymer backbones and upcycling of polymer waste (cf. section 4) [118][119]. Radical chain-end modification as a highly specific

Synthesis and biological evaluation of Argemone mexicana-inspired antimicrobials

• Jessica Villegas,
• Bryce C. Ball,
• Katelyn M. Shouse,
• Caleb W. VanArragon,
• Ashley N. Wasserman,
• Hannah E. Bhakta,
• Allen G. Oliver,
• Danielle A. Orozco-Nunnelly and
• Jeffrey M. Pruet

Beilstein J. Org. Chem. 2023, 19, 1511–1524, doi:10.3762/bjoc.19.108

• most streamlined method involves a copper-promoted Pictet–Spengler-type cyclization with glyoxal, with oxidative aromatization at the 8-position (Scheme 1) [30][35]. A recent report suggested a mechanistic role of Cu2+ involving C–H activation [36]; however, it is known that this reaction proceeds

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• and acetic acid (AcOH) as a Brønsted acid, whereas i(a)midation was achieved by using Pd(OAc)2 as catalyst and Cu(OAc)2 as a Lewis acid. A possible mechanism for this chemodivergent C–H activation is depicted in Scheme 16. First, Pd catalyzed the formation of palladacycle I. Oxidative addition of AcOH

Radical ligand transfer: a general strategy for radical functionalization

• David T. Nemoto Jr,
• Kang-Jie Bian,
• Shih-Chieh Kao and
• Julian G. West

Beilstein J. Org. Chem. 2023, 19, 1225–1233, doi:10.3762/bjoc.19.90

• addition to alkenes and radical decarboxylation, with many of these being driven by light energy. RLT in alkene functionalization Outside of the realm of C–H activation, RLT has been leveraged to afford complex medicinal scaffolds in alkene difunctionalization. A recent example can be found in the merger

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• , diversely functionalized pyridines have been synthesized via C–H activation under transition-metal and rare earth metal catalysis, including C–H alkylation, alkenylation, arylation, heteroarylation, borylation, etc. Recently, metal-free approaches have also been developed for the C–H functionalization of N

• mechanism involves the coordination of pyridine to the metal center of the cationic catalyst and B(C6F5)3 promotes the ortho-C–H activation (deprotonation) of pyridine to afford pyridyl species 6. Next, the 2,1-migratory insertion of alkene 2 into the metal–pyridyl bond in 6 gives the intermediate 7, which

• on subsequent deprotonation gives the branched alkylated product 4. Whereas, in case of styrene 3 a 1,2-insertion takes place possibly due to the formation of the stable benzallylic species 8, which on deprotonation gives the linear alkylated product 5. The C–H activation/C–C cross-coupling reaction

Photocatalytic sequential C–H functionalization expediting acetoxymalonylation of imidazo heterocycles

• Deepak Singh,
• Shyamal Pramanik and
• Soumitra Maity

Beilstein J. Org. Chem. 2023, 19, 666–673, doi:10.3762/bjoc.19.48

• investigation revealed a sequential sp2 and sp3 C–H activation, followed by functionalization driven by zinc acetate coupled with the photocatalyst PTH. A variety of imidazo[1,2-a]pyridines and related heterocycles were explored as substrates along with several active methylene reagents, all generating the

Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

• functional group tolerance with excellent stereoselectivities. In 2016, Ellman and co-workers demonstrated a Rh- or Co-catalyzed highly diastereoselective tandem C–H bond addition/aldol reaction sequence [96][97]. The C–H activation was promoted by pyridine, pyrazole, or imine directing groups, while the

• aldol addition step was performed either in a two-component (intramolecular aldol) or a three-component (intermolecular aldol) arrangement. The enantioselective implementation of this methodology was realized by Herraiz and Cramer in 2021 (Scheme 53) [98]. The reaction sequence is initiated by the C–H

• activation of aryl pyrazoles, followed by the asymmetric conjugate addition to the Michael acceptor. Then, the formed cobalt enolate participates in the intermolecular aldol reaction with an aldehyde 207. The stereochemistry of this tandem procedure is controlled by the chiral Co(III) complex C4 bearing

C3-Alkylation of furfural derivatives by continuous flow homogeneous catalysis

• Grédy Kiala Kinkutu,
• Catherine Louis,
• Myriam Roy,
• Juliette Blanchard and
• Julie Oble

Beilstein J. Org. Chem. 2023, 19, 582–592, doi:10.3762/bjoc.19.43

• formation of the imine directing group and the C3-functionalization with some vinylsilanes and norbonene. Keywords: biomass; C–H activation; flow; furfural; homogeneous catalysis; Introduction The conversion of biomass derivatives into value-added products is one of the key branches of green chemistry and

• furfural derivatives have been developed. In particular, their direct functionalization by transition-metal-catalyzed C–H activation processes [16][17][18] has become a major area of interest where only a few methods have been reported so far. Most examples concern functionalization at C5, which is the

• furfural derivatives by C–H activation, a) in batch: previous works, and b) in continuous flow: this work. C3-alkylation of bidentate imine 1 performed in batch. Optimization of the heating for the alkylation reaction on the homemade pulsed-flow setup. Proposed reaction mechanism for the alkylation

Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

• proceeds similarly to Nakamura’s Fe-catalyzed methodology (Scheme 13) [48]. In 2017, the Cheng laboratory investigated the Co-catalyzed ring-opening/dehydration of oxabicyclic alkenes via the C–H activation of arenes (Scheme 15) [50]. First, the group explored the ortho-naphthylation of N-pyrimidinylindole

• 5.0 equivalents of Cs2CO3 provided the naphthalene core via sequential dehydration. Based on preliminary mechanistic experiments, the authors proposed the reaction begins with the oxidation of Co(II) to Co(III) by O2. MHP-directed C–H activation of the ortho-C–H position generates 90 which can

• investigated the Ru-catalyzed ring-opening/lactamization of azabenzonorbornadiene derivatives 30 with arylamides 116 (Scheme 21) [64]. Weinreb amides outperformed other arylamides, likely serving as a better directing group for the initial aryl-C–H activation. While the scope of functionalized aryl Weinreb

Transition-metal-catalyzed C–H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

• Louis Monsigny,
• Floriane Doche and
• Tatiana Besset

Beilstein J. Org. Chem. 2023, 19, 448–473, doi:10.3762/bjoc.19.35

• trifluoromethylthiolation persist. In particular, the functionalization of a C(sp3)–H bond with a trifluoromethylthiolated moiety by transition-metal-catalyzed C–H activation remains a challenging task both in terms of reactivity and selectivity. In 2015, Besset reported the first C(sp3)–SCF3 bond formation of unactivated

• primary C(sp3) centers by transition-metal-catalyzed C–H activation with the Munavalli or the Billard reagents as the trifluoromethylthiolation source (Scheme 14) [126]. Using a bidentate directing group, this methodology allowed the functionalization of a large range of aliphatic amides with a primary β

• -arylpyridine derivatives and analogs by means of palladium-catalyzed C–H activation reported by the group of Shen [117]. a6 equiv of I were used at 150 °C for 24 h. bThe reaction was conducted at 150 °C for 24 h. C(sp2)–SCF3 bond formation by Pd-catalyzed C–H bond activation using AgSCF3 and Selectfluor® as

Practical synthesis of isocoumarins via Rh(III)-catalyzed C–H activation/annulation cascade

• Qian-Ci Gao,
• Yi-Fei Li,
• Jun Xuan and
• Xiao-Qiang Hu

Beilstein J. Org. Chem. 2023, 19, 100–106, doi:10.3762/bjoc.19.10

• activation/annulation cascade of readily available enaminones with iodonium ylides towards the convenient synthesis of isocoumarins. This coupling system proceeds in useful chemical yields (up to 93%) via a cascade C–H activation, Rh-carbenoid migratory insertion and acid-promoted intramolecular annulation

• . The success of gram-scale reaction and diverse functionalization of isocoumarins demonstrated the synthetic utility of this protocol. Keywords: C–H activation; enaminone; iodonium ylide; isocoumarin; rhodium catalysis; Introduction Isocoumarins are an important structural motif in many naturally

• of 1,2-difunctionalized arenes with alkynes or carbon monoxide (Scheme 1b, III) [13][14][15][16], have been widely applied for the assembly of isocoumarins over the past decades. Recently, the transition-metal-catalyzed ortho C–H activation/annulation of benzoic acids has emerged as an attractive

One-pot double annulations to confer diastereoselective spirooxindolepyrrolothiazoles

• Juan Lu,
• Bin Yao,
• Desheng Zhan,
• Zhuo Sun,
• Yun Ji and
• Xiaofeng Zhang

Beilstein J. Org. Chem. 2022, 18, 1607–1616, doi:10.3762/bjoc.18.171

• one-pot reactions with recyclable organocatalysts [69]. Notably, we conferred K10 acid to promote the C–H activation in the synthesis of spirooxindolepyrrolidines, and used Zeolite HY catalyst to synthesize diastereoselective dispiro[oxindolepyrrolidine]s with a butterfly shape (Scheme 1A and 1B) [70

Modular synthesis of 2-furyl carbinols from 3-benzyldimethylsilylfurfural platforms relying on oxygen-assisted C–Si bond functionalization

• Sebastien Curpanen,
• Per Reichert,
• Gabriele Lupidi,
• Giovanni Poli,
• Julie Oble and
• Alejandro Perez-Luna

Beilstein J. Org. Chem. 2022, 18, 1256–1263, doi:10.3762/bjoc.18.131

• ][3]. As part of this effort, exploitation of furfural and corresponding derivatives attracts continuous attention [4][5][6][7]. In this area, we have actively investigated catalytic C–H activation reactions [8][9][10][11][12][13][14], and as part of this work, we have recently developed an iridium

Direct C–H amination reactions of arenes with N-hydroxyphthalimides catalyzed by cuprous bromide

• Dongming Zhang,
• Bin Lv,
• Pan Gao,
• Xiaodong Jia and
• Yu Yuan

Beilstein J. Org. Chem. 2022, 18, 647–652, doi:10.3762/bjoc.18.65

• decades. With the combination of C–H activation, many aminations of aryl compounds have been established [6][7][8][9][10][11][12][13][14][15][16]. However, it is necessary to introduce the directing group into the arene in most successful cases. As a good amino source, phthalimides have been widely

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• of the alkyl halide and C–H activation can be increased by the presence of active Lewis acid sites on the iron(III) nanoparticles. The scope for this catalytic system can be figured out by the presence of high temperature, high ligand concentration and activated ligands. Chen and co-workers

Iridium-catalyzed hydroacylation reactions of C1-substituted oxabenzonorbornadienes with salicylaldehyde: an experimental and computational study

• Angel Ho,
• Austin Pounder,
• Krish Valluru,
• Leanne D. Chen and
• William Tam

Beilstein J. Org. Chem. 2022, 18, 251–261, doi:10.3762/bjoc.18.30

• hydride, and C–C bond-forming reductive elimination. Computational results indicate the origin of regioselectivity is involved in the reductive elimination step. Keywords: C–H activation; density functional theory; hydroacylation; iridium catalysis; regioselectivity; Introduction Organic synthesis is

Ready access to 7,8-dihydroindolo[2,3-d][1]benzazepine-6(5H)-one scaffold and analogues via early-stage Fischer ring-closure reaction

• Irina Kuznetcova,
• Felix Bacher,
• Daniel Vegh,
• Hsiang-Yu Chuang and
• Vladimir B. Arion

Beilstein J. Org. Chem. 2022, 18, 143–151, doi:10.3762/bjoc.18.15

• -catalyzed norbornene-mediated C–H activation [35] failed and gave 1,4-bis(2-bromophenyl)piperazine-2,5-dione (22, Scheme 5) as the sole product in 61% yield, which to our knowledge is not documented in the literature yet. Synthetic pathway (c) started from methyl 4-(2-nitrophenyl)-3-oxobutanoate prepared in

Earth-abundant 3d transition metals on the rise in catalysis

• Nikolaos Kaplaneris and
• Lutz Ackermann

Beilstein J. Org. Chem. 2022, 18, 86–88, doi:10.3762/bjoc.18.8

• , Germany 10.3762/bjoc.18.8 Keywords: C–H activation; 3d transition metals; green chemistry; late-stage functionalization; sustainability; Transition metal catalysis has emerged as a transformative platform for the assembly of increasingly complex compounds, with enabling applications to natural product

• witnessed major momentum in metal-catalyzed C–H activation [4][5] as a more resource-economical strategy. This approach involves the efficient and selective cleavage of otherwise inert, yet omnipresent C–H bonds. This strategy avoids a variety of steps and reduces the amount of chemical waste. Very recently

Recent advances and perspectives in ruthenium-catalyzed cyanation reactions

• Thaipparambil Aneeja,
• Cheriya Mukkolakkal Abdulla Afsina,
• Padinjare Veetil Saranya and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 37–52, doi:10.3762/bjoc.18.4

• cyclic amines than the aerobic oxidation system. The catalytic cycle for the hydrogen peroxide system involves the formation of the oxoruthenium species (A) and the low-valent ruthenium species (B), whereas the aerobic oxidation system includes C–H activation and a subsequent reaction with molecular

Peptide stapling by late-stage Suzuki–Miyaura cross-coupling

• Hendrik Gruß,
• Rebecca C. Feiner,
• Ridhiwan Mseya,
• David C. Schröder,
• Michał Jewgiński,
• Kristian M. Müller,
• Rafał Latajka,
• Antoine Marion and
• Norbert Sewald

Beilstein J. Org. Chem. 2022, 18, 1–12, doi:10.3762/bjoc.18.1

• 1% in proteins, but is highly conserved in binding sites on protein surfaces mediating PPI [43], it is an attractive target for the development of selective diversifications. C–H activation of the indole C2 position by Pd-catalysis allows both selective arylation [44][45][46][47][48] and formation